What are the best fireplace tools?

Best Fireplace Tool Sets

A fireplace poker, (also known as a fire iron) is a short, rigid rod made of fireproof material used to adjust coal and wood fuel burning in a fireplace, and can be used to stir up a fire.

The most essential fireplace tools in a fireplace set are the following:

• – fireplace tongs.
• – fire poker.
• – fireplace shovel.
• – fireplace brush.
• – bellows or blow poke.
• – and something to store the fireplace tools.

1. Amagabeli Fireplace Log Rack. …
2. Muskoka Signature Series Hearth Center. …
3. ‘My Fire Place Direct’ 5 Piece Fireplace Wrough Iron Tools Set. …
4. Babylon Fireplace Tools & Log Rack Set with Wheels. …
5. Enclume Large Modern Log Rack with Fireplace Tools. …
6. Amagabeli 360 Degree Fireplace Tool Stand.

First, choose tools that are the right height your fireplace. Tool sets that are 26 to 30 inches tall are appropriate for most standard fireplaces. “Mini” sets range from 22 to 25 inches in height and are perfect for wood stoves. Taller sets are available for those grand, scene-setting hearths.

We know that gas logs do not need to be poked, swept, or shoveled, but a striking fireplace tool set next to the firebox fulfills the promise of the hearth.

Step-by-Step Directions on How To Use a Fireplace

1. Put Safety First. …
2. Other steps in safety include: …
3. Open the Damper. …
4. Use Only Seasoned Firewood & Kindling. …
5. Build an Upside-Down Fire. …
6. Prime the Flue, If Necessary. …
7. Contact Burlington Fireplace & Solar.

Glass doors should be fully open when starting a fire and when the fire is burning strongly. The glass doors should be closed as the fire dies down to minimize the amount of room air going up the fireplace chimney. When burning gas logs in a wood burning fireplace, the glass doors should always be fully open.

Glass doors actually help your fire burn better. By enclosing the burning area, firewood is able to burn greater and produce more heat. The glass doors also absorb and radiate heat into the room better than a fireplace without doors.

You should never go to sleep while a fire is in the fireplace. It may seem safe—after all, the fire is small and controlled behind a metal grate. … Before going to bed, make sure the fire is completely extinguished.

When putting out your fireplace fire, don’t throw water on it! Throwing water on the fire will create a lot of smoke and makes it harder to clean the ashes up. Instead, you should: … Put ash over the embers to smother the fire.

Putting out a fire in a wood burner Once the fire has died down you can then use a poker to spread out the embers evenly across the base of the wood burner so there are no pockets of hotter material. You can then sprinkle a thin layer of baking soda over the embers, which will kill off the last remnants of combustion.

Size and height of the fireplace fire On average, fires are burned at a height of 10 cm (4″) above the hearth floor. If dry wood is burned and the fire is of average height, then a height of 50 cm (19.

A fireplace grate will protect your chimney floor by keeping that intense heat off of it. Keeps Fuel In Place: Those who have experience lighting fires know what happens when the bottom logs burn up – the entire stack shifts. … Stay out of harm’s way by investing in a fireplace grate today.

Position the grate in the center of the fireplace so that the long side faces the opening. You should have about 3 inches around the grate on all sides.

Locate the lintel of the fireplace — a bar made of stone that supports the foundation. Proceed to knock down bricks with a hammer to make the opening of the fireplace bigger, leaving the lintel intact. … Contact a contractor if you would like to move the lintel up or make the opening wider.

What Is The Best Fuel To Use For Open Fires?

1. Hardwood. This is wood that has a high density, for example, Oak, Beech and Elm. …
2. Seasoned Logs. ‘Seasoned’ wood has been allowed to dry out for a season before it is used. …
3. A Bed of Ash. Generally, a coal fire should be cleaned every day. …
4. The Way you build your Fire.

How to Light a Fire

1. Step 1: Place two medium sized pieces of firewood on the metal grate approximately 6 inches apart.
2. Step 2: Crumple sheets of newspaper (tinder) in between the two pieces of firewood and cover the tinder with kindling.
3. Step 3: Place one to two more pieces of firewood on top of the other logs.

While it’s easy to ignite and may seem like a good way to help get a fire started, burning cardboard can be dangerous. Because cardboard is treated with chemicals and often contains inks, it can release them into the air when burned. … Or, more commonly, they can float up into your chimney and cause a chimney fire.

Only use plain newspaper or uncoated paper in your fireplace, and use it sparingly. Burning a lot of loose papers at one time can release flying paper embers up onto the roof, which can cause a house fire. It can also create tall flames that could ignite creosote and other residue in the fireplace flue.

10 Things You Should Never Burn in Your Fireplace or Woodstove

• Wet wood. Wet, or unseasoned, firewood can contain up to 45 percent water. …
• Christmas trees. …
• Painted or treated lumber. …
• Any type of paper with colored print. …
• Plywood, particle board, or chipboard. …
• Fire accelerants or fire starters. …
• Plastics. …
• Dyer lint.